Operating range
| Pressure [pmax]: | Vacuum … 55 bar |
| pH: | 0 - 14 |
Temperature: t = -240… +270 °C
Pressure: Vacuum up to 55 bar (according to the operational and/or assembly conditions)
Temperature: Resistance of the ePTFE sealing material short term +310 °C. After first temperature exertion the bolts should be Re-tightened.
Resistant
- All media pH 0-14, e.g:
acids, alkaline, solvents, paint, oil, grease, steam - Excluded:
molten and/or solved alkaline metals and elementary or gaseous fluoride at high temperature or under high pressure - Ageing resistant
Material
100 % pure ePTFE in a stretched filament knotted fibre structure. This ensures that there is a high pressure resistance (restricted cold flow) and a good adaptation to the flange surface.
Main application
- Pipe Columns
- Separation joints
- Mixer
- Pump Housing
- Machine Housing
- Glass- and Graphite-Devices
- Lined vessels
- Sight glasses
- Hand- and Manhole covers (Not TRD401)
- Ventilation and Air Condition Channels
- Steel and Plastic flanges
- Pipes and devices with highly aggressive chemicals
- Gearboxes
Suitable for
- Chemical industry
- Pharmaceutical industry
- Food industry
- General service
Approvals
- TÜV Prüfung acc. MUC-KSP-A066
- BAM for oxygen 60 °C / 40 bar
- DVGW Reg.-Nr.: DG-5127CL0032
- TA-Luft: AMTEC 1.7 · 10-7 mbar · l/(s·m) @ 250 °C test pressure
Food:
- FDA21 CFR 177.1550 (PTFE)
- FDA21 CFR 170.105 (adhesive)
- EG 1935:2004 EU 10/2011
D 1 Protex
ePTFE Gasket
Characteristics
- Simple to install
- No ageing of the ePTFE Joint Sealant
- Excellent adaption, ideal to compensate uneven gland surfaces
- Physiologically safe in temperatures up to +260 °C
- Selection criteria: unevenness of gland should not be bigger than 1/3 of seal thickness
Dimensions
| Order Code | Width/Height (mm) | Standard Roll Length (mtr) | Recommended for flange width | Surface pressure/result. thickness (mm) | ||
|---|---|---|---|---|---|---|
| 10/mm2 | 20/mm2 | 30/mm2 | ||||
| D 1/1 | 1 x 1/td> | 25 | 0.15 | 0.10 | 0.08 | |
| D 1/3 | 3 x 1,5 | 25 | < NW 100 | 0.40 | 0.35 | 0.30 |
| D 1/5 | 5 x 2 | 25 | < NW 300 | 0.80 | 0.60 | 0.50 |
| D 1/7 | 7 x 2,5 | 25 | < NW 800 | 1.00 | 0.80 | 0.70 |
| D 1/10 | 10 x 3 | 25 | < NW 1,500 | 1.20 | 0.90 | 0.80 |
| D 1/12 | 12 x 4 | 10 | < NW 1,500 | 1.45 | 1.15 | 0.95 |
| D 1/14 | 14 x 5 | 10 | > NW 1,500 | 1.60 | 1.20 | 1.00 |
| D 1/17 | 17 x 6 | 10 | In case of | 2.10 | 1.50 | 1.40 |
| D 1/20 | 20 x 7 | 10 | 2.40 | 1.80 | 1.40 | |
| D 1/25 | 25 x 5 | 5 | 1.60 | 1.20 | 1.00 | |
| D 1/25DD | 25 x 8 | 5 | 2.74 | 2.06 | 1.60 | |
| D 1/28 | 28 x 5 | 5 | 1.60 | 1.20 | 1.00 | |
| D 1/40 | 40 x 5 | 5 | 1.60 | 1.20 | 1.00 | |
| Reference Values: Depending on flange surface condition. Gas Tight above 20 N/mm2 during operation conditions. | ||||||