Operating range
Pressure
[pmax]:
|
25 bar |
| Velocity [vmax]: | 20 m/s |
Pressure [pmax]:
|
250 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
150 bar |
| pH: | 0 - 14 |
| Density | 1.53 g/cm³ |
Temperature: t = -100… +280 °C
Practical useful application data:
max. temperature: +200 °C
max. pressure centrifugal pumps: 20 bar
Main application
- Centrifugal pumps
- Mixer
- Kneader
- Agitators
- Autoclave
- Refiner
- Vacuum pumps
Suitable for
- Chemical industry
- Power plant technology
- Pulp and paper industry
- Universal use
- Installation and maintenance shops
Form of delivery
Registered users can view stock information
This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements.
04 - 09 mm on 1 kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 4 | 40.8 |
| 5 [3/16"] | 26.1 |
| 6 | 18.2 |
| 6.35 [1/4"] | 16.2 |
| 7 | 13.3 |
| 8 [5/16"] | 10.2 |
| 9.5 [3/8"] | 7.2 |
| 10 | 6.5 |
| 11 [7/16"] | 5.4 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.5 |
| 12.7 [1/2"] | 4.1 |
| 14 [9/16"] | 3.3 |
| 15 | 2.9 |
| 16 [5/8"] | 2.6 |
| 18 | 2.0 |
| 19 [3/4"] | 1.8 |
| 20 | 1.6 |
| 22 [7/8"] | 1.4 |
| 25 [1"] | 1.0 |
P 1P Budget
Braid of ePTFE Fiber with Incorporated Graphite and Silicone Run-In Lubricant
Characteristics
- Good heat conductivity
- Extended lifetime
- Easy installation and safe handling
- No ageing process
- Resistant against Sewage, Boiler Feed Water, Acids, Alkaline solutions, Oil and Grease
- Recommended shaft surface hardness: HRC 25