Operating range
Pressure
[pmax]:
|
30 bar |
| Velocity [vmax]: | 25 m/s |
Pressure [pmax]:
|
100 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
100 bar |
| pH: | 2 - 12 |
| Density | 1.48 g/cm³ |
Temperature: t = -50… +300 °C
Practical useful application data:
max. temperature: +250 °C
max. pressure centrifugal pumps: 25 bar
Main application
- Boilerfeed pumps
- Refiner
Suitable for
- Chemical industry
- Pulp and paper industry
- Power plant technology
- Boiler houses
Form of delivery
Registered users can view stock information
This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements.
04 - 09 mm on 1 kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 4 | 42.2 |
| 5 [3/16"] | 27.0 |
| 6 | 18.8 |
| 6.35 [1/4"] | 16.8 |
| 7 | 13.8 |
| 8 [5/16"] | 10.6 |
| 9.5 [3/8"] | 7.5 |
| 10 | 6.8 |
| 11 [7/16"] | 5.6 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.7 |
| 12.7 [1/2"] | 4.2 |
| 14 [9/16"] | 3.4 |
| 15 | 3.0 |
| 16 [5/8"] | 2.6 |
| 18 | 2.1 |
| 19 [3/4"] | 1.9 |
| 20 | 1.7 |
| 22 [7/8"] | 1.4 |
| 25 [1"] | 1.1 |
P 20 Carbon
Carbonfiber with special impregnation and Silicone free dynamic Run-In Lubricant
Characteristics
- Strong against abrasive mediums, yet low friction on shaft surface.
- Recommended shaft/sleeve hardness HRC 45
- Volume stabile, minimal shrinkage, good heat conductivity
- Suitable as bullrings