Operating range
Pressure
[pmax]:
|
15 bar |
| Velocity [vmax]: | 10 m/s |
Pressure [pmax]:
|
65 bar |
| Velocity [vmax]: | 2 m/s |
| pH: | 2 - 12 |
| Density | 1.50 g/cm³ |
Temperature: t = -20… +150 °C
Main application
- Centrifugal pumps
- Mixer
Suitable for
- Waste water technology
- Pump industry
Variant
- P7 / TP7 with PTFE Blocking Agent and Paraffin Run-In Lubricant
- P7A with PTFE, without lubricant for valves
Form of delivery
Registered users can view stock information
This packing can be manufactured from 6 to 40 mm square as well as in intermediate, inch sizes and special measurements.
06 - 09 mm on 1kg spool
10 - 15 mm on 2.5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 6 | 18.5 |
| 6.35 [1/4"] | 16.5 |
| 7 | 13.6 |
| 8 [5/16"] | 10.4 |
| 9.5 [3/8"] | 7.4 |
| 10 | 6.7 |
| 11 [7/16"] | 5.5 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.6 |
| 12.7 [1/2"] | 4.1 |
| 14 [9/16"] | 3.4 |
| 15 | 3.0 |
| 16 [5/8"] | 2.6 |
| 18 | 2.1 |
| 19 [3/4"] | 1.8 |
| 20 | 1.7 |
| 22 [7/8"] | 1.4 |
| 25 [1"] | 1.1 |
P 84
Para-Aramid Fiber Packing with with graphite grease impregnation and Run-In Lubricant
Characteristics
- Wear-resistant universal packing
- Good structural strength
- Recommended shaft surface hardness: HRC 50
- Smooth braiding for damaged shaft surfaces
- Very good price-performance ratio