Operating range
Pressure
[pmax]:
|
25 bar |
| Velocity [vmax]: | 20 m/s |
Pressure [pmax]:
|
500 bar |
| Velocity [vmax]: | 3 m/s |
Pressure
[pmax]:
|
250 bar |
| pH: | 2 - 12 |
| Density | 1.50 g/cm³ |
Temperature: t = -100… +280 °C
Practical useful application data:
max. temperature: +200 °C
Main application
- Centrifugal pumps
- Mixer
- Agitators
- Autoclave
- Filter
- Refiner
- Kneader
- Paddle dryer
Suitable for
- Pulp and paper industry
- Sugar industry
- Waste water technology
- Chemical industry
Variant
- Square shape S12K
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 6 to 9 mm in square X-Section as Style S12K.
06 - 09 mm on 1kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 6 | 18.5 |
| 6.35 [1/4"] | 16.5 |
| 7 | 13.6 |
| 8 [5/16"] | 10.4 |
| 9.5 [3/8"] | 7.4 |
| 10 | 6.7 |
| 11 [7/16"] | 5.5 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.6 |
| 12.7 [1/2"] | 4.1 |
| 14 [9/16"] | 3.4 |
| 15 | 3.0 |
| 16 [5/8"] | 2.6 |
| 18 | 2.1 |
| 19 [3/4"] | 1.8 |
| 20 | 1.7 |
| 22 [7/8"] | 1.4 |
| 25 [1"] | 1.1 |
Trapez-Pack®12
Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement with Special Blocking compound and Silicone Run-In Lubricant
Characteristics
- Reinforced packing with reduced wear through improvedheat conductivity
- Recommended shaft surface hardness: HRC 50
- Safe universal packing for abrasive media
- Extrusion resistant, ideal for worn equipment with bigger gap width
- Development: Better sealability of stuffing box