Operating range
Pressure
[pmax]:
|
20 bar |
| Velocity [vmax]: | 20 m/s |
Pressure [pmax]:
|
100 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
100 bar |
| pH: | 1 - 14 |
| Density | 1.75 g/cm³ |
Temperature: t = -100… +280 °C
Practical useful application data:
max. temperature: +200 °C
max. velocity centrifugal pumps: 16 m/s
Main application
- Centrifugal pumps
- Mixer
- Agitators
- Autoclave
- Filter
- Refiner
- Kneader
- Paddle dryer
Suitable for
- Pulp and paper industry
- Chemical industry
- Pharmaceutical industry
- Food industry
Approvals
- FDA Conformity
- Food Approval EG 1935:2004 in accordance with EU 10/2011
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 4 to 9 mm in square X-Section.
04 - 09 mm on 1kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 4 | 35.7 |
| 5 [3/16"] | 22.9 |
| 6 | 15.9 |
| 6.35 [1/4"] | 14.2 |
| 7 | 11.7 |
| 8 [5/16"] | 8.9 |
| 9.5 [3/8"] | 6.3 |
| 10 | 5.7 |
| 11 [7/16"] | 4.7 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.0 |
| 12.7 [1/2"] | 3.5 |
| 14 [9/16"] | 2.9 |
| 15 | 2.5 |
| 16 [5/8"] | 2.2 |
| 18 | 1.8 |
| 19 [3/4"] | 1.6 |
| 20 | 1.4 |
| 22 [7/8"] | 1.2 |
| 25 [1"] | 0.9 |
Trapez-Pack®619
Hybrid-Braid in W-Profile of heat conductive ePTFE Yarn with Silicone Run-In Lubricant and form stable PTFE fibers
Characteristics
- Wear resistant through Running Track Reinforcement
- Very high heat conductivity through employment of a special heat conductive Compound
- Clean packing, no contamination of medium
- Increases the operative lifetime due to high mechanical strength and excellent heat conductivity
- Provides maximum protection of shaft against wear
- Recommended shaft surface hardness: HRC 25