Operating range
Pressure
[pmax]:
|
25 bar |
| Velocity [vmax]: | 25 m/s |
Pressure [pmax]:
|
250 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
150 bar |
| pH: | 1 - 14 |
| Density | 1.55 g/cm³ |
Temperature: t = -100… +280 °C
Main application
- Centrifugal pumps
- Mixers
- Kneaders
- Agitators
- Refiners
- Autoclave
- Filters
Suitable for
- Bauxit Industry
- General Mining
- Ash Slurrries in Power plants
- Pulp and paper industry
- Chemical industry
- Waste water technology
- Universal use
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 6 to 9 mm in square X-Section.
06 - 09 mm on 1 kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 6 | 17.9 |
| 6.35 [1/4"] | 16.0 |
| 7 | 13.2 |
| 8 [5/16"] | 10.1 |
| 9.5 [3/8"] | 7.1 |
| 10 | 6.5 |
| 11 [7/16"] | 5.3 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.5 |
| 12.7 [1/2"] | 4.0 |
| 14 [9/16"] | 3.3 |
| 15 | 2.9 |
| 16 [5/8"] | 2.5 |
| 18 | 2.0 |
| 19 [3/4"] | 1.8 |
| 20 | 1.6 |
| 22 [7/8"] | 1.3 |
| 25 [1"] | 1.0 |
Trapez-Pack®18 ProStar
Hybrid-Braid in W-Profile made of ePTFE/Graphite and Carbon/Graphite Yarn with additional X-Section Impregnation and Silicone Run-In Lubricant
Characteristics
- Preferred packing for sealing abrasive mediums in all manner of plant rotating equipment
- Excellent when used in crystalizing products
- Low Coefficient of friction and ultimate heat conductivity
- High plant standardization possibilities
- Recommended Shaft Surface Hardness HRC35