Operating range
Pressure
[pmax]:
|
20 bar |
| Velocity [vmax]: | 20 m/s |
Pressure [pmax]:
|
100 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
100 bar |
| pH: | 1 - 13 |
| Density | 1.55 g/cm³ |
Temperature: t = -100… +280 °C
Main application
- Centrifugal pumps
- Mixer
- Agitators
- Kneader
- Filter
Suitable for
- Pulp and paper industry
- Chemical industry
- Power plant technology
- Waste water technology
- Applications with abrasive products and when white packing is required
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 6 to 9 mm in square X-Section.
06 - 09 mm on 1 kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 6 | 17.9 |
| 6.35 [1/4"] | 16.0 |
| 7 | 13.2 |
| 8 [5/16"] | 10.1 |
| 9.5 [3/8"] | 7.1 |
| 10 | 6.5 |
| 11 [7/16"] | 5.3 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.5 |
| 12.7 [1/2"] | 4.0 |
| 14 [9/16"] | 3.3 |
| 15 | 2.9 |
| 16 [5/8"] | 2.5 |
| 18 | 2.0 |
| 19 [3/4"] | 1.8 |
| 20 | 1.6 |
| 22 [7/8"] | 1.3 |
| 25 [1"] | 1.0 |
Approvals
Food Approval EC 1935:2004 in accordance with EU10/2011
Trapez-Pack®63 Papermaster HS
Hybrid braid in W-Profile made of heat conductive ePTFE Yarn with Meta-Aramid fiber reinforcement and Silicone Run-In Lubricant
Characteristics
- Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment.
- Recommended shaft surface hardness: HRC 35
- Porosity filling coating increases density and protects the packing in crystallizing mediums.
- W-Profile Reinforcement reduces shaft wear