Best tools for best results
Professional, instrumental
A quality tool and a knowledge based handling when installing or maintaining a sealing component reduce wear. This results in a higher service life.
A maintenance person and the equipment they work on are only as good as the quality of their maintenance tools. Even excellent employees and machines can only do average work without good tools.
We carry barrier water unit, lantern ring, thread seal tapes, packing cutters and extractors, thread and helical screwers and maintenance tools with the best features.
We supply high quality products and accessories tailored specifically to your equipment types
Contact our Sealing Solution Team, use our call back service and let us be your sealing partner.
-
Tool
PROCONTROL
Precise metering and constant pressure of sealing water (p = 1 bar above media pressure) - environmental protection and cost reduction in fact of reduced seal water consumption; Flow and pressure monitoring - protects the aggregate from failing (inductive alarm system); Stable and compact construction guarantees safety and simple handling; Corrosion and temperature resistant; Displays are easy to read and clean; With an inductive switch (option) an alarm system can be used
-
Tool
STAR AQUA
Economical storage independent from shaft diameter, supply in 1,180 mm length; Replacement for machined lantern rings; Universal use, excellent chemical and thermal resistance; Easy to remove with packing extractor; No corrosion and wear of shafts, no canting during use; No waste as length can be connected (see picture)
-
Tool
HD W1 Thread Sealing Tape
High density and strength properties; HD Tape plies during the wrapping in the thread and forms a dense PTFE film, which does not harden and stays flexible; Immediate after connection of the construction parts it is possible to turn them 45° back for alignment.; Chemically inert and does not react with steam, water, fuel, acids, gases or solvents.; Once applied the connection can be disassembled; Fretting of the threads is practically impossible
-
Tool
W5/PS Packing Cutter
The device uses the packing dimension and the shaft diameter to determine the approximate cut length; Time saving; Repeatable results; Reduced waste; Suitable as well for Trapez-Pack
-
Tool
W5 PS / Clip HD
Quick change of cutting angle when producing a 75° Butt cut due to both sided marking on cutting support; Easy handling due to precise angle cutting aligned to marking on cutting support; Simple handling when cutting a 45° Skive cut by aligning the packing on the bracket of the cutting support; Replacement blades available
-
Tool
W2S Sharp Screw Head
Excellent spot drilling and extracting of old and hardened packings as well as blocked and difficult locations.
-
Tool
W2W Helical Screw Head
Excellent spot drilling and extracting of brittle, soft packings as well as blocked and difficult locations.
-
Tool
Special Packing Extractor W2S SPZ
Excellent spot drilling and extracting of old and hardened packings as well as blocked and difficult locations.
-
Tool
Special Packing Extractor W2W SPZ
Excellent spot drilling and extracting of old and hardened packings as well as blocked and difficult locations.
-
Tool
W5FDKS Sheet Gasket Cutter
Fast and flexible solution for a whole range of applications; Easy and safe operation; Seal cutting from 30 up to 1000 mm; Suitable for various sheet thicknesses up to 9 mm; Also small sized sheet pieces are processable; Spare parts on request